Silicone over-molding is a process that an existing part in different material usually a plastic, metal or silicone part that overmoled with liquid silicone rubber in LSR injection molding pricess. LSR overmolding widely used in medical areas, electronic devices. For example, a silicone over-molding2020-03-26
Silicone Molding, also known as silicone compression molding or rubber compression molding, is a very common processing technique for manufacturing silicone rubber parts, which is feeding solid silicone raw material mixed with vulcanizing agent in the mold, through a certain period of high temperatu2020-03-15
Liquid Silicone Injection Mold without Shut-off ValvesLiquid silicone injection mold without shut-off valves, similar to edge-injection-gate plastic injection mold. Because Liquid silicone & lsr products by silicone injection molding without shut-off valves will have big injection gate mark or flow2020-03-11
Transfer Moulding is converted from compression moulding and take advantages of injection molding. Rubber transfer moulded parts are more precise and more consistent than Compression Moulding parts. Compared with Liquid Silicone Injection Moulding, Transfer Moulding is rather cost-effective and easy development. To know more about why the transfer rubber products are more accurate than traditional compression molded parts.2020-02-07
Transfer Molding, Compression Molding, Rubber Injection Molding or Liquid Silicone Injection Molding? Which is right to your silicone rubber projects. Compression molding is a economical and simple rubber molding, which designed to place blocky-shape rubber materials (granular & pelletized shape) in mold chambers & cavities to be molded by heat and pressure. Compression molded manufacturing process like making waffles & cake mold.
Rubber Transfer Molding Design is similar to rubber compression molding, but there is a pot on the top plate and a ram above the pot. This mold pot is used to contain pre-measured rubber raw material and transfer it to the cavities through pot runner and spruced.
oid air stagnation, it is important to have a good exhaust device in the mold. In addition, LSR materials do not shrink like thermoplastic in the mold. Liquid Silicone Rubber tend to expand when be heated and will shrink slightly when be cooled. Therefore, the product does not always stay on the con2019-12-20