Xiamen Better Silicone Rubber Co., Ltd
You are here: Liquid Silicone Rubber Molding » Liquid Injection Molding

Our Company

We make liquid injection molding and manufacture different kinds of liquid silicone rubber molded parts for medical device, sanitary & bathroom products, electrical products, cosmetics, automotive and machines parts etc. Our team also can offer LSR products parts moldabilities & over-molded manufacturabilities analysis or design support etc.

Get in Touch

E-mail : admin@better-silicone.com
Add: No. 165th, Tong'an Park, Industry Zone, Tona'An District, Xiamen City, China

Find Us

Liquid Injection Molding News Center

  • Transfer Molding & Compression Molding or Injection Mold?
    2020-01-28

    Transfer Molding, Compression Molding, Rubber Injection Molding or Liquid Silicone Injection Molding? Which is right to your silicone rubber projects. Compression molding is a economical and simple rubber molding, which designed to place blocky-shape rubber materials (granular & pelletized shape) in mold chambers & cavities to be molded by heat and pressure. Compression molded manufacturing process like making waffles & cake mold. Rubber Transfer Molding Design is similar to rubber compression molding, but there is a pot on the top plate and a ram above the pot. This mold pot is used to contain pre-measured rubber raw material and transfer it to the cavities through pot runner and spruced.

  • What are the Characteristics of Liquid Silicone Injection Mold---LSR Mold Design Analysis
    2019-12-20

    oid air stagnation, it is important to have a good exhaust device in the mold. In addition, LSR materials do not shrink like thermoplastic in the mold. Liquid Silicone Rubber tend to expand when be heated and will shrink slightly when be cooled. Therefore, the product does not always stay on the con

  • Liquid Silicone Transfer Injection Molding - Cost-Effective LSR Mold
    2019-12-12

    Liquid Silicone Transfer Injection Molding - Cost-Effective LSR Mold

  • What's Silicone Compression Molding?
    2019-12-10

    Compression molding is one of the most tranditional and oldest silicone rubber manufacturing technique. Silicone Compression molding has been used to mold silicone rubber parts at the beginning of the rubber manufacturing industry. Silicone compession molding’s main process parameters are: molding t

  • LSR Silicone Buttons - Liquid Rubber Keypad Future Trend
    2019-12-09

    LSR Silicone Buttons is made of transparent food grade liquid silicone. Liquid rubber keypad can be silkscreen printed or laser engraved with different patterns. Conductive LSR rubber buttons are very durable, with good wear resistance and heat resistance. LSR button pad also has a good backlight effect for good transparency of liquid silicone material.

  • Why Choose LSR Liquid Silicone for Toilet Washer?
    2019-12-04

    This seal, sometimes called a Flapper Seal sit right at the bottom of the Flush Valve. This valve discharges water from the cistern tank when you push the button, turn the handle...etc. Its job is to hold back about 6 litres of water, ready to flush.

  • What's the difference among transfer molding, liquid injection molding and compression molding?--Hot Topic
    2019-11-21

    What is transfer molding? Transfer molding is a combination of compression molding and liquid silicone injection molding. Transfer molding considered as a simplified variation of injection molding, and the process has much in common with earlier iterations of injection molding before the introductio

  • Horizontal Liquid Silicone Injection Molding vs. Vertical LSR Injection Molding - Hot Topic
    2019-11-13

    Liquid Silicone Rubber parts production has three different molding ways, from the view of LSR injection molding machines. They are Horizontal Liquid Silicone injection Molding, Vertical LSR Injection Molding, and Liquid Silicone Transfer Injection Molding. Both of Horizontal and Vertical Liquid Silicone Injection Molding can realize automatic production. But vertical molding requires mechanical arms to take out the products, while demoulding of horizontal LSR injection molding is by air blowing

  • Total 8 pages  Go to Page
  • Go

Your Reliable Liquid Silicone Injection Molding Supplier

Moldability & Manufacturability Analysis
Designs Support and Improvement
Professional Sale Engineers Team
Fast Delivery
No matter Low-volume or Mass Production
One Stop Service: Silicone, Rubber, Liquid Silicone, Plastic and Assembly

Subscribe

Get latest updates and offers.
Copyright  Xiamen Better Silicone Rubber Co., Ltd, All rights reserved.  Site Map