Silicone Plastic Bonding Silicone Plastic Bonding is also know as Rubber Plastic Overmolding, or Plastic Insert Molding. Rubber to plastic overmolding is the process of joining plastic substrate to silicone rubber with the assistance of glue through overmolding into a finished part. Plastic substrat
What is cycle time?Cycle time is the total time required to complete all the stages of the injection molding cycle.The cycle time is made up of the following stages:Fill time.The time required to fill the mold with polymer. The injection molding machine controls the velocity (flow rate) of the molte
Liquid Injection Mold (LIM) also known as LSR Mold, Liquid Silicone Mold, Liquid Silicone Rubber Injection Mold, Silicone Injection Mold, which is an advanced mold processing compared to traditional Silicone Rubber Compression Molding, and is an ideal process for many custom parts and components with complex geometry, high precision dimension requirement and high safety material request. Liquid Injection Mould has significant advantages in flexible tooling design, excellent liquid silicon rubber properties, high production efficiency & safe closed production environment and tight tolerance/precision, LSR 2-Shot (2K) or LSR Multi-Shot injection molding (also known as LSR overmolding), etc.
Why We Choose Liquid Silicone Injection Molding (LIM) Process for Complex Geometry? LSR Injection Molding is an ideal process for many custom parts and components with complex geometry, showing significant advantages over traditional Silicone Rubber Compression Molding and Transfer Injection Molding
Why do customers would like to choose Liquid silicone instead of solid silicone?--LSR silicone’s feature trendHigh Safety- 100% Food Grade and Medical GradeLiquid Silicone is safer compared to solid silicone. Liquid silicone rubber is a 100% Food Grade two-part platinum-cured silicone, which is a hi
Air Trap Defect in Liquid Silicone Injection Molding VentingAir Trap as well as gas trap, a common problem during Liquid Silicone Injection Molding, is the root cause of bubbles, voids and blisters, short shot visible on molded part, which are mainly caused by unreasonable mold venting system and pa